FEP Film with Frame for Anycubic Photon M3 210.6 x 148 mm 2pcs

FEP film for Anycubic Photon M3 with frame 210.6 x 148 mm 2pcs SKU S020096 is a replacement framed FEP film set for the resin vat of the Anycubic Photon M3 resin 3D printer. The film is installed at the bottom of the vat and works as the release layer between the liquid resin, LCD screen and printed model.

The film is supplied already fixed in a special frame adjusted to the Photon M3 vat size. This makes replacement easier, reduces the risk of incorrect tension and helps restore stable resin printing after the original film becomes worn or damaged.

Main Advantages

• Compatible with Anycubic Photon M3 designed for the resin vat of this printer model.
• 210.6 x 148 mm size matched to the Photon M3 vat format.
• 2pcs set includes two framed FEP films for replacement and spare use.
• Framed design makes installation easier and reduces manual tensioning errors.
• 0.15 mm thickness suitable for stable LCD resin 3D printing.
• 95% light transmittance helps UV light pass through the vat bottom correctly.
• SKU S020096 for accurate spare part identification and ordering.
• LCD screen protection a properly installed film helps reduce the risk of resin leakage.

Technical Specifications

Product name	FEP Film with Frame for Anycubic Photon M3 210.6 x 148 mm 2pcs
Original product name	FEP film for Anycubic Photon M3 with frame 210.6 x 148 mm 2pcs
SKU	S020096
Part type	Framed FEP film for resin vat
Film size	210.6 x 148 mm
Thickness	0.15 mm
Quantity	2pcs
Compatibility	Anycubic Photon M3
Printer screen size	7.6″
Light transmittance	95%
Purpose	Replacement release film for resin vat bottom
Printer type	LCD resin 3D printer
Condition	New replacement part

Product Description

FEP film for Anycubic Photon M3 is one of the essential consumable parts of the resin vat. During printing, each layer is cured through the LCD screen and then separates from the FEP surface as the build platform moves. If the film becomes scratched, cloudy, stretched or damaged, print quality and success rate can decrease.

The framed design is convenient for users who want a faster replacement process without complex manual film tensioning. It helps maintain correct geometry, reduce installation errors and restore stable layer release.

When Replacement Is Needed

• The film surface has scratches, punctures or dents.
• The film becomes cloudy and transmits UV light less effectively.
• The model starts sticking to the bottom of the vat more often.
• First layer defects or build plate separation appear.
• Cured resin residue remains after failed prints.
• There is a risk of resin leaking onto the LCD screen.
• The film is stretched or has lost even tension.

Compatibility

This FEP film set is intended for the following printer model:

• Anycubic Photon M3

Before ordering, check the printer model, film size, framed construction and SKU S020096. FEP films for other Anycubic Photon models may differ by size, frame shape, mounting method and resin vat compatibility.

Installation Recommendations

1. Turn off the 3D printer and remove the resin vat.
2. Pour the remaining resin through a filter into a clean container.
3. Clean the resin vat from resin residue and dirt.
4. Carefully remove the old framed FEP film.
5. Install the new framed FEP film into the correct position.
6. Check that the frame is seated correctly and is not misaligned.
7. Secure the vat parts without excessive force.
8. Check the vat for leaks before starting a print.

Care Tips

• Do not use metal scrapers on the FEP film surface.
• Remove resin residue with a soft silicone spatula or plastic tool.
• Do not press sharp objects into the film.
• After every failed print, check the vat bottom for cured resin pieces.
• Do not print with punctures, deep scratches or leakage.
• Store spare films in a clean dry place away from dust and direct sunlight.

FAQ

What is FEP film for Anycubic Photon M3?

It is a replacement release film for the resin vat bottom of the Anycubic Photon M3 resin 3D printer.

What is the SKU of this film?

The SKU is S020096.

How many films are included?

The set includes 2 framed FEP films.

What is the film size?

The film size is 210.6 x 148 mm.

What is the film thickness?

The film thickness is 0.15 mm.

What is the light transmittance?

The light transmittance is 95%.

Does this film fit Photon M3 Plus or Photon M3 Max?

No. This product card is prepared for Anycubic Photon M3. Photon M3 Plus and Photon M3 Max require different film sizes.